铝合金液态与半固态压铸件的组织性能研究  

Microstructure and Mechanical Properties of the Liquid Die Castings and Semi-solid Die Castings of Aluminum Alloy

作　　者：余忠土[1] 张恒华[1] 邵光杰[1] 许珞萍[1] 徐霖[1] 

机构地区：[1]上海大学材料学院,上海200072

出　　处：《金属热处理》2003年第1期32-34,共3页Heat Treatment of Metals

摘　　要：对A35 6铝合金液态与半固态压铸成形件在压铸态和T6热处理态下的力学性能与微观组织进行了研究。试验得出 ,与液态压铸成形件相比 ,半固态压铸成形件可以获得更佳的综合力学性能 ;经同样T6热处理后 ,两者抗拉强度都得到提高 ,伸长率下降 ,但半固态压铸成形件抗拉强度提高的幅度更大 ,伸长率降低得更少。The microstructure and mechanical properties of the products made of A356 aluminum alloy by the two different forming methods (semi solid casting and liquid die casting) under state of casting and T6 heat treatment has been studied.It shows that the semi solid castings have better mechanical property than that of the liquid die castings.After the same T6 treatment,both of them increase in strength and decrease in elongation.However,the semi solid castings increase in strength more than that of liquid die castings and decrease in elongation less than the later,meanwhile the mechanism of why the semi solid castings are superiors to the liquid die castings is also discussed from the microcosmic view.

关 键 词：铝合金 半固态压铸成形 液态压铸成形 力学性能 微观组织 

分 类 号：TG146.21[一般工业技术—材料科学与工程] TG249.2[金属学及工艺—金属材料]