高温流化床中IH I灰样的临界流化速度研究  

MINIMUM FLUIDIZING VELOCITY OF IHI ASH AT HIGHTEMPERATURE FLUIDIZED BED

作　　者：王昕[1] 郭庆杰[1] 杨海瑞[1] 吕俊复[1] 岳光溪[1] 刘志宏 须田俊之 左藤顺一 

机构地区：[1]清华大学热能工程系,北京博士生100084 [2]石川岛播磨重工业株式会社,日本东京工程师1358733

出　　处：《煤炭转化》2003年第1期48-52,共5页Coal Conversion

基　　金：国家"十五"科技攻关资助项目 ( 2 0 0 113A40 1A0 3);日本石川岛播磨重工业株式会社资助项目

摘　　要：在 D8 2的不锈钢高温流化床实验台中 ,以 IHI灰样作为实验物料 ,研究了高温流化床的临界流化速度 .结果表明 ,对于属于 B类粒子的 IHI灰样 ,温度由常温升高到 1 0 0 0℃时 ,雷诺数小于 40 ,流化床运动处于层流运动区范围 .随着床层温度升高 ,物料颗粒的最小流化速度减小 .根据实验结果提出了预测不同温度下的该灰样颗粒最小流化速度式 .Flow characteristics of IHI ash at high temperature were investigated in a high temperature fluidized bed which was made by stainless steel and inner diameter was 82 mm.High temperature sintered ash was employed as bed material.The experimental results showed that IHI ash belonged to B group; Re numbers were less than 40 when the bed temperature was increased from ambient temperature to 1 000 ℃;And that the minimum fluidizing velocity of material particles decreased with increasing the bed temperature.According to the experiential data,a experiential formula was proposed to predict the IHI ash particle minimum fluidizing velocity at different temperature.

关 键 词：高温流化床 IHI灰样 临界流化速度 研究 最小流化速度 

分 类 号：TQ051.13[化学工程]