玻璃纤维的空气变形工艺研究  

Research on the technology of air-textured glass fiber

作　　者：孟鑫[1] 隋全侠[1] 马会英[1] 

机构地区：[1]天津工业大学纺织与服装学院,天津300160

出　　处：《天津工业大学学报》2003年第1期7-9,17,共4页Journal of Tiangong University

摘　　要：将两种不同号数和捻度的有捻玻纤纱进行了空气变形加工 ,并对 5 6 0 .5 4tex和 137tex两种纱的变形效果与工艺进行了对比研究 ,测试并分析了喂入纱线细度、超喂率、供气压力对变形纱结构和性能的影响 ,得出了本研究条件下的较好工艺参数 ,并对玻璃纤维空气变形的优点进行了分析 .实验结果表明 ,玻璃纤维经空气变形后 ,其强力有所降低 ,但纺织性能得到了改善 ,可以直接用于织造 ,其涂层织物的涂塑率有所增加 .This paper analyzes the advantage of air-texturing glass fibers and mainly studies the air-texturing technology of the 560.54 tex twisted glass fiber, contrasts them with the 137 tex twisted glass yarn, analyzes the influence of feeder yarn, overfeed and air-jet pressure on the structure and property of air-textured glass yarn and has got reasonable technological parameters. This paper points out that the air-textured glass fiber′s breaking strength is lower than the supplied yarn but the properties have been improved and can be directly used to weave and its coated ratio is increased.

关 键 词：空气变形工艺 玻璃纤维 空气变形纱 工艺参数 性能分析 

分 类 号：TS102.42[轻工技术与工程—纺织工程] TQ171.77[轻工技术与工程—纺织科学与工程]