烧结温度对高矫顽力Sm_2(Co,Fe,Cu,Zr)_(17)永磁体磁性能的影响  

Effect of Sintering Temperature on the Magnetic Properties of High Coercivity Sm_2(Co,Fe,Cu,Zr)_(17) Permanent Magnets

作　　者：彭元东[1] 易健宏[1] 李丽娅[1] 罗述东[1] 唐新文[1] 杜娟[1] 李云卿[2] 

机构地区：[1]中南大学粉末冶金国家重点实验室,长沙410083 [2]北京有色金属研究总院,北京100088

出　　处：《粉末冶金技术》2003年第1期27-30,共4页Powder Metallurgy Technology

基　　金：教育部高等学校骨干教师研究计划资助项目

摘　　要：为深入了解高矫顽力Sm2 (Co ,Fe ,Cu ,Zr) 17永磁体烧结温度与磁体磁性能的关系 ,设计了 6种不同烧结温度 ,分别测试了各温度下烧结试样的密度和磁性能。试验结果表明∶高矫顽力Sm2 (Co ,Fe,Cu ,Zr) 17磁体的密度随着烧结温度的升高而升高 ,在 12 10～ 12 2 0℃达到最大值 ;磁体在 12 0 5～ 12 10℃烧结时有较高的磁性能 ,内禀矫顽力超过 1910kA/m ,最大磁能积达到 2 10kJ/m3,温度过高或过低都使磁体性能下降 ;剩磁 Br随磁体密度的升高而上升 。In order to study the relations between the sintering temperature and the magnetic properties of high-coercivity Sm2(Co,Fe,Cu, Zr)17 permanent magnets, the densities and magnetic properties of samples made at 6 different sintering temperatures were measured. The results show that the density of high-coercivity Sm2(Co,Fe,Cu, Zr)17 permanent magnets increases and then decreases slightly with the increase of sintering temperature, and the maximum density is reached at the sintering temperature between 1210°C and 1220°C; the permanent magnets have better magnetic properties at sintering temperature between 1205°C and 1210°C; the intrinsic coercivity is 1910 kA/m and the maximum magnetic energy product is 210 kJ/m3; magnetic properties will decrease above or below the temperature range; the remanence increases with the increase of alloy density, and the intrinsic coercivity changes with alloy density, grain size and cellular size.

关 键 词：烧结温度 矫顽力 永磁体 磁性能 

分 类 号：TM273[一般工业技术—材料科学与工程] TF125.8[电气工程—电工理论与新技术]