中空无机微珠填充PP复合材料的流动性能  

Study on flowability of the hollow inorganic bead-filled PP composites

作　　者：梁基照[1] 李锋华[1] 蒋兴华[1] 郭荣基[1] 钟明强[1] 王丽[1] 

机构地区：[1]华南理工大学,广州510641

出　　处：《合成树脂及塑料》2003年第2期11-12,共2页China Synthetic Resin and Plastics

摘　　要：应用熔体流动指数仪,考察了温度(T)、载荷(P)、填料含量及粒径(d)对中空无机微珠填充聚丙烯复合材料流动性的影响。结果表明,试样的熔体流动指数(MI)随着T或P的增加而提高,而MI随中空无机微珠体积分数的变化不太明显。当P小于5kg时,MI随着微珠d的增加而轻微提高;而当P大于5kg后,MI则随d的增加有所下降。The influence of temperature (7), loading (P) and content and size of filler on flowability of the hollow inorganic bead (HB)-filled polypropylene (PP) composites was investigated by means of a melt indexer. The results show that melt flow index (MI) of the specimen increase as the T or P goes up, but not varies obviously with volume fraction of HB. MI ascends somewhat with increasing the HB diameter (d) when P is less than 5 kg, and the value descends to a certain extent when P exceeds 5 kg.

关 键 词：聚丙烯 中空无机微珠 复合材料 流动性能 熔体流动指数仪 

分 类 号：TQ327[化学工程—合成树脂塑料工业]