聚丙烯旋转成型用聚乙烯醇浆液料稳定性的研究  

Stability of the PVA Aqueous Slurry for the Rotational Moulding of Polypropylene

作　　者：王晓[1] 季尧岽[1] 许家瑞[1] 

机构地区：[1]中山大学化学与化学工程学院//聚合物复合材料及功能材料教育部重点实验室,广东广州510275

出　　处：《中山大学学报（自然科学版）》2003年第2期35-37,共3页Acta Scientiarum Naturalium Universitatis Sunyatseni

基　　金：国家自然科学基金资助项目(50073030);中山大学创新化学实验研究基金资助项目

摘　　要：研究了以PVA为稳定剂的聚丙烯旋转成型浆液用料配方各组分对浆液稳定性的影响。实验结果表明,随着浆液PP浓度的增大,浆液的稳定性也相应地增大。稳定剂的浓度越高,浆液的稳定性也明显增高。浆液的配方用量以稳定剂的质量分数为3％,浆液的PP的质量分数在20％～25％之间为宜。The effects of the variations of the ingredients of the aqueous slurry using polyvinyl alcohol (PVA) as a stabilizer on the stability of the PVA aqueous slurry for the rotational moulding of polypropylene have been investigated. Experimental results showed that the increase of the PP concentration could significantly raise the stability of the PVA aqueous slurry and the higher the adding level of the stabilizer, the greater the stability of the aqueous slurry. Optimum compounds of the slurry can be obtained by using adding level of PVA 3% and the concentration of PP at the range of 20%-25%.

关 键 词：聚丙烯 旋转成型 聚乙烯醇浆液料 稳定性 塑料成型工艺 稳定剂 质量分数 

分 类 号：TQ325.14[化学工程—合成树脂塑料工业] TQ320.66