慢应变速率下铝合金的腐蚀行为  

STUDY ON CORROSION PROPERTIES OF ALUMINUM ALLOYS AT SLOW STRAIN RATE

作　　者：何建平[1] 樊蔚勋[1] 袁庆铭[2] 

机构地区：[1]南京航空航天大学材料科学与技术学院,210016 [2]厦门航空有限公司,361009

出　　处：《中国腐蚀与防护学报》2003年第1期17-20,共4页Journal of Chinese Society For Corrosion and Protection

基　　金：民航总局 2 0 0 0科研资助项目

摘　　要：根据铝合金腐蚀的基本特征 ,建立了新鲜铝合金瞬时腐蚀速率的计算方法 .通过改变试样的应变速率 ,研究了力学效应对LC4CS铝合金腐蚀电化学行为的影响 .结果表明 :在恒应变速率作用下 ,铝合金自腐蚀电位有明显的负移趋势 ,且应变速率愈大 ,负移速率愈快 .与阳极氧化后的铝合金短路耦合 ,在应变量大于 0 0 4后 ,LC4CS铝合金的自溶解电流显示急剧增大的趋势 .对同一应变速率而言 ,随着应变量的增加 。A computing method for instantaneous corrosion rate on fresh surface of aluminum alloys was created in terms of corrosion characteristic of aluminum alloys,and the effect of mechanical factors on the corrosion properties of LC4CS aluminum alloy has been studied with variation of strain rate.Results show that the natural corrosion potential of LC4CS aluminum alloy exhibits the negative drift trend under acting load of the constant strain rate,and the larger the strain rate,the quicker the negative drift.In the state of galvanic couple with the aluminum alloy anodized,after the strain is above 0.04,the natural dissolution current will sharply increases.While strain rate is constant,the instantaneous corrosion rate of the fresh aluminum alloy also increases with the augmentation of strain.

关 键 词：铝合金 腐蚀 应变速率 瞬时腐蚀速率 

分 类 号：TG174.3[金属学及工艺—金属表面处理]