脉冲直流电弧钎焊温度场计算机模拟及分析  

Numerical Simulation and Analysis of Pulsed Direct Current Brazing Temperature Field with Computer

作　　者：余春[1] 于治水[1] 李瑞峰[1] 

机构地区：[1]华东船舶工业学院材料与环境工程系,江苏镇江212003

出　　处：《华东船舶工业学院学报》2003年第1期48-52,共5页Journal of East China Shipbuilding Institute(Natural Science Edition)

摘　　要：通过有限元法模拟镀锌钢板脉冲GTAW电弧钎焊温度场。研究了改变钎焊参数对692K(镀锌层熔化温度)和1323K(钎料熔化温度)的两条温度线的宽度变化的影响,经实验验证,计算结果与实测值结果相接近。本研究表明,采用有限元数值模拟[1]方法可以用于优化钎焊工艺。The brazing temperature field of Zincplating steel sheet is modeled by finite element analysis in this paper.Through changing brazing parameters,the changing curves of both 692K (temperature link of Zinc melted) and 1 323K(temperature link of brazing filler melted) are obtained. Compared with the practical experiment results,they are similar. So the brazing parameters can be made with numerical modeling.And it's worth of developing to optimize the brazing process through finite element analysis.

关 键 词：镀锌钢板 脉冲GTAW电弧钎焊 数值模拟 有限元分析 温度场 

分 类 号：TG454[金属学及工艺—焊接]