六角切圆燃烧锅炉燃烧器区域煤粉粒径分布的试验研究  

Experimental Investigation of Pulverized coal Particle Diameter Distribution at the Burner Zone of a Hexagonal tangentially Fired Boiler

作　　者：李瑞扬[1] 朱群益[1] 赵玉晓[1] 秦裕琨[1] 

机构地区：[1]哈尔滨工业大学能源科学与工程学院,黑龙江哈尔滨150001

出　　处：《热能动力工程》2003年第2期155-158,共4页Journal of Engineering for Thermal Energy and Power

摘　　要：对某 6 70t h六角切圆燃烧煤粉炉进行冷态模化试验 ,应用激光多普勒测速仪 (PAD)进行测量 ,研究燃烧器出口区域煤粉颗粒的粒径和速度分布 ,分析它们对受热面结渣的影响 ,并比较加大上层燃烧器二次风假想切圆直径后结渣状况的改善 。A cold state model test was conducted of a 670 t/h tangentially fired pulverized coal boiler with burners being arranged at the six corners of a furnace. The distribution of pulverized coal particle diameter and velocity at the outlet zone of burners was studied, using a phase Doppler anemometer to make relevant measurements. Moreover, the impact of the above distribution on the slag formation on heating surfaces was analyzed. By way of comparison one can also perceive a significant alleviation of slag formation following the introduction of a larger imaginary tangential circle diameter of secondary air fed to the top layer burners. On the basis of the above a series of effective measures were taken to solve the boiler slagging problem.

关 键 词：六角切向燃烧 PAD 粒径分布 结渣 

分 类 号：TK224[动力工程及工程热物理—动力机械及工程]