稠油注汽井用高温调剖封窜剂的研制与应用  

Preparation and Application of Profile Modification/Sealing Agent for Injecting-steam Well of Viscous Crude Oil

作　　者：潘赳奔[1] 栾林明[1] 张国荣[1] 刘洪强[1] 李西林[1] 孙楠[1] 

机构地区：[1]中国石化胜利油田有限公司孤东采油厂工艺所,东营257237

出　　处：《精细石油化工进展》2003年第4期15-17,20,共4页Advances in Fine Petrochemicals

摘　　要：随着单井蒸汽吞吐周期的增加 ,加剧了油层纵向和平面上的非均质性。汽驱井组油层存在高渗透带或孔道 ,注入蒸汽上升 ,从稠油顶部跨越 ,会出现越顶现象 ,造成提早汽窜 ,注蒸汽驱的波及效率进一步降低。针对此问题 ,开发了稠油注汽井用高温调剖封窜剂。室内研究结果表明 ,研制的高温调剖封窜剂HD、HT具有较好的高温成胶性能和强度。现场应用孤东油田的 9口井 ,有效 8口 ,有效率 88.9% ,累计增油 72 6.8t。Due to increase in the cycle of steam huff-puff production of single well, the unevenness of oil reservoir on vertical and horizontal aggravated. Because the oil reservoir of steam flooding wells had high permeation strips or pores, injected steam rose and crossed over the top of viscous crude oil. The carry-top phenomenon happened and the efficiency of injecting-steam flooding was decreased. To aim at the question, profile modification/sealing agent for injecting-steam viscous crude oil wells was prepared. The profile modification/sealing agent was applied to 9 wells in Gudong Oil Fields, in which 8 wells were successful, and the efficient rate was 88.9%. 726.8 t of extra oil was recovered in all.

关 键 词：稠油注汽井 高温调剖封窜剂 研制 应用 孤东油田 

分 类 号：TE39[石油与天然气工程—油气田开发工程]