检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
机构地区:[1]西安科技大学能源学院,陕西西安710054 [2]西安科技大学教育部西部矿井开采及灾害防治重点实验室,陕西西安710054 [3]中煤科工集团西安研究院,陕西西安710054
出 处:《煤炭学报》2015年第5期973-978,共6页Journal of China Coal Society
基 金:国家自然科学基金资助项目(51174156;51174278);陕西省科技统筹创新工程资助项目(2011KTCQ01-41)
摘 要:我国西部浅埋煤层开采引起严重的地表塌陷和潜水流失,进行条带充填控制隔水岩组稳定性是保水开采的有效途径。基于"上行裂隙"和"下行裂隙"对隔水岩组稳定性的影响,建立了2个充填条带的非水平五跨连续梁力学模型,并给出了其放松结构,求出了岩梁的应力和弯矩表达式。考虑充填条带及其支撑岩柱的压缩变形,给出了条带充填隔水岩组的下沉曲线,提出了"上行裂隙"发育高度与"下行裂隙"发育深度和位置的计算方法。研究表明,上行裂隙发育高度随间隔宽度的增大而增大,下行裂隙发育深度随隔充比的增大而明显增大。充填位置、充填条带宽度、充填间隔宽度和隔充比是隔水岩组稳定性的主要影响因素。Shallow coal seam mining caused serious surface subsidence and phreatic water loss in western China. Stripfilling aquiclude stability control is an effective way to water preserved mining. Based on the effect of 'upward crack'and 'downward crack'on the stability of the water resisting strata group,the un-horizontal five span continuous beam mechanical model of 2 filling strips was established,and its relaxed structure was set up,thus the expression of stress and bending moment expression of rock beam was put forward. Considering the compression deformation of filling strip and its supporting strata pillar,the subsidence curve of the water rock group with filling strip was obtained,so the calculating method of the 'upward crack'development height as well as the depth and location of 'downward crack'were proposed. Research results show that the development height of upward crack increases with increase of the width of filling interval,and the depth of downward crack increases with the increase of the ratio of filling width to filling interval significantly. The filling position,filling strip width,filling interval width,and the ratio of filling strip width to filling interval width are the key factors to the stability of water resisting rock group.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.145