刀具安装得较高或较低时工作角度的计算公式  

Formulas of Working Angles of the Cutting Tool for Tool Nose Locating Change

作　　者：赵耀军[1] 董谟禹[2] 

机构地区：[1]淮南矿业学院机械工程系 [2]淮南机械职工大学

出　　处：《淮南矿业学院学报》1992年第2期35-41,共7页

摘　　要：本文用矢量代数法推导出刀具刀尖安装得较高或较低时工作角度的计算公式。给出了刀具标注角度参考系平面与工作角度参考系平面之间的关系式。最后,通过分析和计算实例指出了现有二种近似公式的不足之处。In this paper, the formulas of working angles of the cutting tool for tool nose locating position changes are derived from vector method. The paper shows the clear relationship between the reference planes for the nominal angles of the cutting tool and the planes for the working angles of the cutting tool. Based on the analysis and calculation examples, the defects of the two present approximate formulas are pointed out.

关 键 词：刀具 安装 角度 计算公式 

分 类 号：TG711.02[金属学及工艺—刀具与模具]