重力式井下油水分离确定分流比的实验研究  

Experimental research of split ratio determination of downhole gravitational oil-water separation.

作　　者：薄启炜[1] 张琪[1] 赵东伟[1] 张秉强 

机构地区：[1]石油大学(华东)石油工程学院 [2]中石油勘探开发科学研究院

出　　处：《石油机械》2003年第6期3-5,11,共4页China Petroleum Machinery

基　　金：2001年中国石化集团公司先导试验项目:井下油水分离技术研究

摘　　要：为深入研究井下油水分离同井回注技术,根据水力学相似原理,在几项基本假设的前提下,开展了油水分离室内管流模型实验和室内井筒模型实验,对自然重力式井下油水分离确定分流比进行了实验研究。实验结果表明,在分离效果一定的情况下,分流比随油井产流量、含油量的增加而增大;在φ139.7 mm(5(1/2)英寸)套管和φ73 mm(2(7/8)英寸)油管的井筒环空模型中,产液量小于50 m^3/d时,分流比可小于0.7,分离效果较好,而当注入液量大于130 m^3/d时,油水几乎不能分离。To make further investigation into the downhole oil-water separation and separated water reinjection to the same hole, experiments for oil-water separation in tubes and in simulated well bore were made based on the hydrodynamic similarity theory. And split ratio determination in gravitational oil-water separation was investigated. The experimental results show that, the split ratio increases with the increase of liquid produced and oil content with the separation effect given; good separation effect can be achieved with a split ratio of less than 0.7 when the liquid production rate lower than 50 m3/d, and water can hardly be separated from oil while the injection rate is higher than 130 m3/d.

关 键 词：重力式 井下油水分离 分流比 实验研究 室内管流模型 室内井筒模型 

分 类 号：TE355[石油与天然气工程—油气田开发工程] TE312