Design of a New Type of Stub Tuner in ICRF Experiment  

作　　者：秦成明 赵燕平 毛玉周 丁家义 王鹏 潘亚平 李国超 

机构地区：[1]Institute of Plasma Physics,Chinese Academy of Sciences,Hefei 230031,China

出　　处：《Plasma Science and Technology》2003年第3期1779-1784,共6页等离子体科学和技术（英文版）

摘　　要：In the Ion Cyclotron Range of Frequency (ICRF) heating experiment, impedance matching is of great practical significance, because wide variations in antenna loading are observed within the discharge, in tokamaks operating in H-mode. A sudden decrease in antenna loading accompanying the L-mode to H-mode transition typically occurs on a timescale of a few milliseconds, as does the increase in loading at the H- to L-mode transition. Therefore, it is necessary to match dynamically in the transmission line between the generator output and the antenna input connections[1]. A new type of stub tuner being developed utilizes the difference in radio-frequency wavelengths between gas and liquid due to different relative dielectric constants. The impedance matching can be adjusted in realtime in an attempt to track the variations in the antenna loading. Since there are no mechanically moving parts in the short ends of stub, the change can be more convenient and safe, moreover, it can withstand higher voltage without breakdown. This system device will be applied in the HT-7 superconductor Tokamak ICRF experiment.In the Ion Cyclotron Range of Frequency (ICRF) heating experiment, impedance matching is of great practical significance, because wide variations in antenna loading are observed within the discharge, in tokamaks operating in H-mode. A sudden decrease in antenna loading accompanying the L-mode to H-mode transition typically occurs on a timescale of a few milliseconds, as does the increase in loading at the H- to L-mode transition. Therefore, it is necessary to match dynamically in the transmission line between the generator output and the antenna input connections[1]. A new type of stub tuner being developed utilizes the difference in radio-frequency wavelengths between gas and liquid due to different relative dielectric constants. The impedance matching can be adjusted in realtime in an attempt to track the variations in the antenna loading. Since there are no mechanically moving parts in the short ends of stub, the change can be more convenient and safe, moreover, it can withstand higher voltage without breakdown. This system device will be applied in the HT-7 superconductor Tokamak ICRF experiment.

关 键 词：ICRF stub tuner impedance matching 

分 类 号：TL503[核科学技术—核技术及应用]