混凝-水解酸化-好氧工艺处理印染废水的设计与运行  

Design and Operation of Treatment of Textile Printing and Dyeing Wastewater by Coagulation-hydrolytic Acidification-Aerobe Process

作　　者：纪荣平[1] 任利国 

机构地区：[1]扬州大学环境工程系,江苏扬州225009 [2]扬州华源有限公司,江苏扬州225001

出　　处：《污染防治技术》2003年第3期25-26,共2页Pollution Control Technology

摘　　要：采用混凝 -水解酸化 -好氧工艺处理印染废水 ,设计规模 30 0 0m3/d。当进水COD在 5 71～ 175 2mg/L时 ,处理后的出水可达国家《污水综合排放标准》(GB 8978— 1996 ) ,主要污染物 ρ(COD) <10 0mg/L。Textile printing and dyeing wastewater is treated with coagulation hydrolytic acidification and aerobe process. The treating capacity, is 3*!000*!m 3/d. When the inlet COD concentration is in arrange of 571～1*!752*!mg/L, the outlet effluent with COD<100*!mg/L can meet the requirement of national wastewater discharge standard(GB*!8978-1996) quite well.

关 键 词：混凝 水解酸化 好氧处理 印染废水 设计 

分 类 号：X791[环境科学与工程—环境工程] X703