几种结构钢加热转变时针状奥氏体的形成规律及组织遗传  

THE FORMATION OF ACICULAR AUSTENITE AND STRUCTURAL INHERITANCE IN SOME STRUCTURAL STEELS DURING REAUSTENITIZATION

作　　者：刘世程[1] 李国柱[1] 王莎莎[1] 戚正风[1] 

机构地区：[1]大连铁道学院

出　　处：《金属热处理学报》1992年第4期39-45,共7页

基　　金：国家自然科学基金

摘　　要：用光镜及透射电镜研究了几种结构钢经1250℃加热预淬火后再加热到A_c1以上时所形成的奥氏体的形态和晶粒大小,结果得出,与合金结构钢一样,碳素结构钢在以较慢速度加热到A_c1以上时,也能形成针状奥氏体。分析了影响奥氏体形态的诸因素以及针状奥氏体与组织遗传的关系。The morphology and grain Sizses of austenite formed in some stru-ctural carbon steels and alloy steels during reaustenitization,which had beenprequench hardened from 1250℃,were investigated by means of optical andtransmission electron microscopy.It was found that in carbon steels reausteni-tized above Ac_1 temperature under a lower heating rate,the pre-quenched stru-cture was tempered and the recovery occured,while the recrystallization didnot take place,the lath boundary in the original structure remained and car-bides distributed along it,austenite could form at the lath boundary betweenthe carbide and the tempered martensite and grow up into an acicular one,which were the same as that in alloy structural steels.The factors effectingon the morphology of austenite and the relationship between the acicular aus-tenite and the structural inheritance were discussed also.

关 键 词：结构钢 针状奥氏体 组织遗传 加热 

分 类 号：TG161.1[金属学及工艺—热处理]