检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
出 处:《光子学报》2003年第5期513-516,共4页Acta Photonica Sinica
摘 要:研究了气体组分和峰化电容对紫外光预电离脉冲HF激光器性能的影响 实验发现最佳气体混合比为SF6 /C2 H6 =2 0∶1,峰化电容和主放电电容的最佳比为Cp/Cs=0 .3,在最佳气体混合比时 ,最大激光脉冲峰值功率和对应的总气压随充电电压的提高而增大 同时得到了E/P值和激光能量的关系 整个器件的最大激光输出为 4 0 0mJ ,脉冲峰值功率为 1.5MW ,最大电光转换效率约为 2 .2 %The influence of the peaking capacitor and the pressure of mixture gas on the performance of UV preionized pulsed HF laser is investigated. There exists an optimum mixing ratio (SF 6/C 2H 6=20∶1) and an optimum capacitor ratio (C p/C s=0.3). Under the optimum mixing ratio an increase in the charging voltage increases the maximum attainable laser pulse peak power and the optimal pressure.Laser output energy is up to 400 mJ with a maximum electric efficiency about 2.2%, the maximum laser pulse peak power is 1.5 MW.
关 键 词:非链式脉冲HF激光器 峰化电容 气体组分 激光输出特性 紧凑型 化学激光器 气体混合比
分 类 号:TN248.5[电子电信—物理电子学]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.15