一种改性酚醛树脂浸渍炭材料固化性能研究  

STUDY ON THE PROPERTIES OF CARBONMATERIALS IMPREGNATED WITH A NEWETHER PHENOLIC RESIN

作　　者：陈建[1] 周霞[1] 赵红兵[1] 李新跃[1] 

机构地区：[1]四川轻化工学院,四川自贡643033

出　　处：《炭素技术》2003年第3期10-14,共5页Carbon Techniques

基　　金：科技部中小企业创新基金(CM04 01C2621500214)

摘　　要：石墨材料经改性酚醛树脂浸渍固化后,机械强度显著提高,并具有普通酚醛树脂所不具备的耐碱性。改性酚醛树脂的最佳浸渍温度为40～60℃,最佳固化温度为160～180℃,最佳固化压力为0.6～1.5MPa。用此改性酚醛树脂作石墨材料浸渍剂,只需2次浸渍后即可达到不透性,较其他树脂减少1～2次浸固循环次数,而且不需要添加固化剂。A new type resin was synthesized and used to impregnate carbon material, of which the mechanical strength and the properties of alkalis resistance was greatly improved in comparison to the traditional impregnation agent such as furan resin and epoxy resin. For the new ether phenolic resin, the optimum dipping temperature is 40 - 60℃, and the optimum temperature for curing is 160 - 180℃ with the curing pressure being around 0. 6 - 1. 5 MPa. The properties of carbon material treated twice with the new type resin are better than those treated three or four times with traditional or common resins. For the novel resin, no curing agentis needed during curing process.

关 键 词：改性酚醛树脂 炭材料 浸渍 

分 类 号：TQ127.11[化学工程—无机化工] TQ423.1