新闻纸厂过程用水DCS的来源与清除  

Origins of DCS of Newsprint Mill's Process Water and Evaluation of DAF Efficiency in DCS Removal

作　　者：王旭[1] 詹怀宇[1] 赵光磊[1] 何北海[1] AltafH.Basta 陈嘉翔[1] 张棽 

机构地区：[1]华南理工大学制浆造纸工程国家重点实验室,广州510640 [2]广州造纸有限公司,广州510281

出　　处：《中国造纸》2003年第7期1-4,共4页China Pulp & Paper

摘　　要：对新闻纸厂过程用水溶解物和胶体物(DCS)的来源进行了分析,并对气浮池去除DCS的效率进行了评价。结果表明,采用2000r/min转速、离心20min和0.22μm微孔滤膜过滤可有效地分离悬浮物、胶体物和溶解物。DCS主要来源于DIP、GP和TMP,其含量可占总杂质的90％左右。但它们所含的DCS性质有所不同,DIP以非离子型为主,而GP和TMP以阴离子型为主。气浮池对悬浮物的去除效果明显,但对DCS的去除却十分有限。In this paper, some impurities including dissolved and colloidal substances (DCS) of process water in newsprint mill are analyzed and the efficiency of DAF in DCS removal is evaluated. The results show that centrifugation at 2000r/min for 20min and filtration with 0.22um membrane are practically suitable to separate the suspended substance, colloidal substance and dissolved substance in the process water. DIP, TMP and GP are the main origins of DCS which accounts for about 90% of the total contaminants. Although the DCS contents of those pulps are very similar, most of DCS in DIP are non-ionic and in GP and TMP are anionic. DAF is very effective to clear suspended substance, but has low efficiency to remove DCS. There is no obvious difference between the feed water and accepted water in DCS content, conductivity, cationic demand and CODCr.

关 键 词：溶解物 胶体物 来源 造纸用水 污染物 清除 

分 类 号：X793[环境科学与工程—环境工程]