不同开清流程与短绒关系的研究  

Research of Relationship between Different Opening Process and Short Fibre

作　　者：丁志坚[1] 王联军[2] 

机构地区：[1]河北省石家庄第三棉纺织厂 [2]河北科技大学

出　　处：《棉纺织技术》2003年第8期15-18,共4页Cotton Textile Technology

摘　　要：通过对河北省石家庄第三棉纺织厂 1999年～ 2 0 0 1年三年来 ,进口清梳联与国产卷喂生产流程各工序半制品、成纱短绒率变化的分析得出 :进口清梳联中主要采用分梳打击 ,各工序短绒增长率普遍高于以开松梳理为主的国产卷喂流程 ;在两种流程中梳棉都是产生短绒的主要工序。进而提出应根据不同产品、不同质量要求。Through comparing and analyzing the change of semi finished and yarn short fibre content in each process between import blowing carding units and domestic lap feeder process in Hebei Shijiazhuang №3 Cotton Mill in term of three years,the result is that increase rate of short fibre content of each process in import blowing carding units is higher than that of in the domestic lap feeder process.Because the former applies carding and beating mainly,the latter applies opening and carding mainly,the carding process is the major process of increasing short fibre in each of two technological process.So the view is pointed out that selecting different technological process according to different products,different quality requirement,different materials.

关 键 词：清梳联设备 开清流程 分梳打击 短绒增长率 棉纤维 进口设备 国产设备 

分 类 号：TS114[轻工技术与工程—纺织材料与纺织品设计]