GX型模铸保护渣的研制与应用  

RESEARCH ON AND APPLICATION OF GX SERIES INGOT CASTING POWDER

作　　者：赵存忠 毛刘策 范天锡 曾伟 

机构地区：[1]大冶钢厂

出　　处：《炼钢》1992年第3期27-31,19,共6页Steelmaking

摘　　要：GX型模铸保护渣除具有还原保护、吸附夹杂物和保温基本功能外,能较好地解决模壁粘渣。指出保持液渣中玻璃相的绝对量,造成玻璃相和条状硅灰石析晶之间因物质差异而产生的应力,使粘渣易于脱落;控制使用后液渣中Al_2O_3含量在15％左右,可保持保护渣使用性能的稳定性。生产实践获得明显的经济效益。In addition to its basic functions of reducing protection, impurity aborption and temperature holding the GX series ingot casting powder can tackle the problem of slag sticking on the mould wall. The paper pointed out that it is more advantageous to keep up an absolute fraction of glass phase in the molten flux and create a stress due to the difference of physical properties between glass phase and precipitated phase of tabular spar to enable the disconnection of slags from mould wall. As Long as A1_2O_3 content in the used slag is controlled within 15% behaviors of casting powder will remain constant in the process and consequently marked economical efficiency can be obtained.

关 键 词：模铸 保护渣 GX型 

分 类 号：TF77[冶金工程—钢铁冶金]