浓缩液直接回用的尼龙6聚合工艺开发  

Technological development of PA6 polymerization by directly utilizing reclaimed concentrated liquid

作　　者：王文波[1] 余跨纲 李练武[1] 

机构地区：[1]巴陵石油化工有限责任公司化纤厂,湖南岳阳414014

出　　处：《合成纤维工业》2003年第4期22-23,共2页China Synthetic Fiber Industry

摘　　要：通过萃取水浓缩液与新鲜己内酰胺的配比实验 ,研究了浓缩液直接回用的尼龙 6聚合工艺。采用80 %左右的浓缩液与新鲜己内酰胺按 12 5 10 0 0的比例配置成含水 2 .5 %左右的混合液进行工业化聚合试验 ,生产的切片相对分子质量、相对分子质量分布及低聚体含量等指标与新鲜己内酰胺生产的切片质量指标接近。The process technology of PA6 polymerization with directly utilizing reclaimed concentrated extraction liquid was studied through the experiments on the proportion of concentrated liquid and fresh caprolactam. A mixed liquid with water content of 2.5% was obtained by mixing concentrated extraction liquid with concentration of about 80% and fresh caprolactam in the proportion of 1251 000. The industrial polymerization experiments were conducted with this liquid mixture. The produced chips had the similar relative molecular weight, molecular weight distribution and oligomer content with the chips from fresh caprolactam.

关 键 词：浓缩液 直接回收利用 尼龙6 聚合工艺 开发 环状低聚物 聚已内酰胺 

分 类 号：TQ323.6[化学工程—合成树脂塑料工业]