信捷PLC与计算机串口和以太网通信的VC++编程技术  

Techniques of Communication VC++ programming for Xinjie PLC with PC through Serial Communication Port and Ethernet Adapter

作　　者：朱向荣[1] 冯乔生[1] 施少捷 吕苓芝 

机构地区：[1]云南师范大学信息学院,昆明650500 [2]昆明鑫辉检测有限公司,昆明650500 [3]云南恒大科技有限公司,昆明650500

出　　处：《软件》2015年第6期75-82,共8页Software

基　　金："移动式管道焊接检测系统上位机端集成人机界面与远程控制"资助;资助的单位为"昆明鑫辉检测有限公司

摘　　要：信捷XC系列PLC是完全国产化的产品。若使其上位机程序能用通用高级语言而非只是该机模态软件编写,就能使XC系列PLC上位机控制程序与其它设备控制程序进行集成,有利于进一步促进PLC推广应用。本文研究了信捷XC系列PLC与计算机分别通过串口RS232和以太网进行通信的VC++编程技术,使得能在上位机VC++程序中发送与接收XC系列PLC的数据,从而实现了PC机通过VC++上位机程序对PLC的远程控制。Xinje XC series PLC is a kind of complete domestic product. If their upper PC programs can be programmed with the general high-level language, rather than their modal software, it is enabled to integrate the upper PC control programs of the PLC with the control programs of other devices, and XC series PLC can then be further widely used. This paper proposed the techniques of VC++ programming of communications between PC and XC series PLC through RS232 and Ethernet network adapter respectively, which enabled the VC++ upper programs to send data to the XC series PLC or receive the data from them. The remote controls of the XC series PLC can thus be implemented by the VC++ upper PC programs.

关 键 词：信捷XC系列PLC RS232 PC机以太网卡 Modbus协议 

分 类 号：TP311.1[自动化与计算机技术—计算机软件与理论] TP273.5[自动化与计算机技术—计算机科学与技术]