检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
机构地区:[1]沈阳航空航天大学航空航天工程学部(院)高等教育研究所,辽宁沈阳110136
出 处:《中国测试》2015年第5期70-74,共5页China Measurement & Test
基 金:航空科学基金资助项目(20131954004)
摘 要:为提高总温传感器的测量准确度,以温度传感器滞止理论为基础,根据现有的设计经验合理设计一种与传感器探针配套使用的滞止罩,滞止罩采用纵横式结构设计。给出不同的测试环境及测温范围下滞止罩材料的选取建议;在气流温度为1 000 K、气流速度马赫数为0.5的条件下,利用CFD软件对在不同的滞止罩气流进出口面积比、不同的传感器探针探测长度、不同的主滞止室扩张角等3组条件下进行数值仿真,得到9种工况下滞止室内气流速度分布及探针表面的温度分布。经对比研究分析得到纵横式滞止罩对高速流动气体具有较好的滞止效果。In order to improve the measuring accuracy of total temperature sensors, a stagnation hood of crossbar structure was designed to match with the sensor probe based on the stagnation theory of temperature sensors and current design experience. Recommendations were given to select stagnation hood materials under different testing conditions and measurement ranges. Under the conditions of 1 000 K-air flow temperature and 0.5 Ma-air velocity, CFD software was used for numerical simulation based on different air import/export area ratios of stagnation hoods,detection lengths of sensors,extending angles of primary stagnation chambers. In this way,the distribution of airflow velocity inside stagnation chambers and of probe surface temperature was detected under nine working conditions. A best design scheme for crossbar stagnation hoods was obtained through the above comparative analysis.
关 键 词:总温传感器 纵横式滞止罩 滞止罩结构设计 数值仿真 测量误差
分 类 号:V233[航空宇航科学与技术—航空宇航推进理论与工程] TP212.11[自动化与计算机技术—检测技术与自动化装置]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.145