粉状磷酸一铵工艺技术新进展——管式反应器生产粉状磷酸一铵设计剖析  

New Development of Powder MAP Process——Design Analysis of Powder MAP Production Using Tubular Reactor

作　　者：王剑 

机构地区：[1]南化集团设计院,江苏南京210048

出　　处：《硫磷设计与粉体工程》2003年第5期1-4,共4页Sulphur Phosphorus & Bulk Materials Handling Related Engineering

摘　　要：针对粉状MAP产品含水量偏高、贮存中易结块等问题 ,分析了产量翻番改造设计方案。该方案以浓缩磷酸为原料 ,采用管式反应器代替传统的加压反应釜 ,并直接把料浆喷入喷粉塔 ,成品经干燥、冷却制得含水量低于 2 .0 %的粉状MAP ,解决了粉状MAP产品易结块等问题 。In view of problems of powder MAP products such as high water content and easy caking during storage, the design option to double the production capacity is analyzed. The option is based on concentrated phosphoric acid as feed and uses tubular reactor to replace the conventional pressure reactor. The slurry is injected directly into the powder blower, the product is dried, cooled to form powder MAP whose water content is less than 2.0%, which has solved problems like caking in powder MAP products. The technical measures to be improved in the future are also proposed.

关 键 词：粉状磷酸-铵工艺 技术进展 管式反应器 设计 

分 类 号：TQ442.14[化学工程—化学肥料工业] TQ440.52