基于CAN总线的印染联合机同步调速控制系统设计  

Design of the Control System of Synchronization of Timing on Printing and Dyeing Joint Machine Using the Technology of CANBUS

作　　者：王桂荣[1] 钱剑敏[1] 

机构地区：[1]东华大学信息科学与技术学院,上海200051

出　　处：《东华大学学报（自然科学版）》2003年第5期75-78,共4页Journal of Donghua University(Natural Science)

摘　　要：针对印染工业中印染联合机同步调速控制系统的特点 ,结合现场总线技术尤其是CAN总线技术在国内的推广应用 ,完成了控制系统的设计。该系统是基于PC机作为上位监控计算机 ,多单元同步控制器和温度控制器等作为下位机的遵循CAN通信规程的通信系统。文中对系统的硬件结构和软件设计进行了深入的研究和系统的阐述 。This paper designs the control system of synchronization of timing on printing and dyeing joint machine according to the characteristic of this system as well as the application of Field Bus (especially CAN Bus) in our country. In the system, a PC acts as the monitor computer and the multi cell synchronous controllers and temperature controllers act as the intelligent nodes. They communicate with each other in accordance with the CAN Protocol. This paper lucubrates the hardware structure and software design of the system and puts forward the scheme of implementation.

关 键 词：CAN总线 印染联合机 同步调速控制系统 系统设计 现场总线 印染工业 

分 类 号：TS190.47[轻工技术与工程—纺织化学与染整工程]