检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:熊信柏[1] 李贺军[1] 李克智[1] 黄剑锋[1] 马威 王新木
机构地区:[1]西北工业大学,陕西西安710072 [2]第四军医大学口腔医院,陕西西安710032
出 处:《稀有金属材料与工程》2003年第11期923-926,共4页Rare Metal Materials and Engineering
摘 要:通过声电沉积工艺在碳/碳复合材料表面制备了生物活性透钙磷石涂层,采用SEM、FTIR、XRD研究了超声场中电流密度对涂层组成结构和形貌的影响。发现在一定工艺条件下,随电流密度增加,涂层的平均晶粒尺寸减小,致密度增加;当电流密度小于10mA/cm2时涂层形貌为片状,10mA/cm2~26mA/cm2时为粒状,32mA/cm2时为花菜心状。且涂层中透钙磷石晶体的择优取向也发生变化,择优晶面依次为(021)、(111)、(220)。同时还讨论了涂层微观结构变化机理。Sonoelectrodeposition technique has been used to prepare bioactive brushite coatings on carbon/carbon composites. The effects of current density on the structures and morphology of the bioactive brushite coatings were also investigated. It is found that the coatings with plate-like (021), granular-like ( 111), and flower-like (2 (2) over bar0) morphology can be fabricated by using different current densities respectively. The results show that the sizes of as-deposited particles decrease with increasing current density. In addition, the mechanism of the variation of their microstructuies was also discussed.
关 键 词:声电沉积 碳/碳复合材料 透钙磷石 生物活性涂层
分 类 号:TB332[一般工业技术—材料科学与工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.222