不同的预先热处理对T10钢低温盐浴渗铬的影响  

Influence of Different Pre-heattreatment on Low Temperature Salt-bath Chromizing of T10 Steel

作　　者：叶金玲[1] 邹敢锋[1] 于小勇[1] 

机构地区：[1]华南理工大学机械学院,广东广州510641

出　　处：《热加工工艺》2003年第6期33-34,共2页Hot Working Technology

摘　　要：研究了不同的预先热处理对 T10钢低温盐浴渗铬的影响。结果表明 ,经离子渗氮后再进行低温盐浴渗铬 ,在同样的渗铬工艺条件下 ,其渗层深度增加最多。Influence of different pre-heattreatment on low temperature salt-bath chromizing of T10 steel was studied . The results show that the T10 steel is chromized under the low temperature salt-bath after being ionicnitrided ,the depth of chromized layer increase the most under the same condition .

关 键 词：离子渗氮 低温渗铬 

分 类 号：TG156.83[金属学及工艺—热处理]