基于电弧喷涂和电刷镀的快速制模技术  

The Rapid Die-Manufacturing Technology Based on Electric Arc Spraying and Brush Plating

作　　者：何仲赟[1] 朱东波[2] 唐一平[1] 卢秉恒[1] 

机构地区：[1]西安交通大学,陕西西安710049 [2]西安电子科技大学,陕西西安710071

出　　处：《模具工业》2003年第12期43-47,共5页Die & Mould Industry

基　　金：国家863计划项目 (2001AA421270)

摘　　要：提出了1种电弧喷涂和电刷镀一体化的快速制模技术 ,该技术采用电弧喷涂工艺在母模表面快速沉积一层致密的低熔点金属薄壳 ,从而制作出模具的型腔 ,然后采用电刷镀工艺在模具工作表面刷镀强化涂层 ,以显著提高模具表面的硬度和耐磨性。并介绍了电弧喷涂和电刷镀一体化快速模具制造设备 ,所述快速模具制造方法和设备用于汽车新车型开发和样车试制 ,可以显著降低开发成本。A new rapid die_manufacturing technology with the combination of electric arc spraying and brush plating was proposed. By using the electric arc spraying technology, a thin layer of dense and low_melting_point metal was rapidly deposited on the surface of the master die so as to make the cavity of the die; then by using the electric brush plating technology, a reinforcing layer was plated on the working surface of the die to markedly increase the hardness and wear_resistant property of the die surface. An equipment for rapid die manufacture with the combination of electric arc spraying and brush plating was introduced. The rapid die_manufacturing method and device used for the development of new models of automobiles and trial manufacture of sample cars could greatly reduce the development cost and shorten the development cycle.

关 键 词：汽车覆盖件 电弧喷涂 电刷镀 快速制模 

分 类 号：TG305[金属学及工艺—金属压力加工]