Electrochemical performance of LiNi_(0.5)Mn_(0.5)O_2 with different synthesis methods  

作　　者：Hong Li Qiang Xu Xi-Xi Shi Da-Wei Song Lian-Qi Zhang 

机构地区：[1]Department of Applied Chemistry, School of Chemical and Engineering, Tianjin University [2]School of Materials Science and Engineering, Tianjin University of Technology

出　　处：《Rare Metals》2015年第8期580-585,共6页稀有金属（英文版）

基　　金：financially supported by the National High Technology Research and Development Program of China (No. 2011AA11A234);the National Natural Science Foundation of China (Nos. 51272175 and 20901058);the Program for New Century Excellent Talents in University of China (No. NCET10-0952)

摘　　要：Li Ni0.5Mn0.5O2 as a cathode material for Li-ion battery was prepared by the metal acetate decomposition method, sol–gel method, and carbonate co-precipitation method, respectively. The influences of synthesis methods on the physical and electrochemical behaviors of Li Ni0.5Mn0.5O2 were characterized by X-ray diffraction(XRD), scanning electron microscopy(SEM) and electrochemical tests. XRD patterns show that both the sol–gel and carbonate co-precipitation methods can form single phase of layered structure, while a trace of Ni O impurity is observed via the metal acetate decomposition method. SEM results show the as-prepared carbonate particle has a spherical morphology with an average diameter of 10 lm, consisted of primary nano-sized particles with particle diameter of200 nm. The sample prepared by the carbonate co-precipitation method exhibits the highest discharge specific capacity and the best cycling stability, which results from the steady homogeneity of precursor constant by the fixation of CO2-3group. It can deliver an initial discharge specific capacity of 186.3 m Ahág-1, and retain 170 m Ahág-1after100 cycles at a current rate of 20 m Aág-1in the voltage range of 2.5–4.7 V at 25 °C. Moreover, even at the high temperature of 55 °C, it still delivers a reversible specific capacity of 222.6 m Ahág-1with little capacity loss after 30 cycles.Li Ni0.5Mn0.5O2 as a cathode material for Li-ion battery was prepared by the metal acetate decomposition method, sol–gel method, and carbonate co-precipitation method, respectively. The influences of synthesis methods on the physical and electrochemical behaviors of Li Ni0.5Mn0.5O2 were characterized by X-ray diffraction(XRD), scanning electron microscopy(SEM) and electrochemical tests. XRD patterns show that both the sol–gel and carbonate co-precipitation methods can form single phase of layered structure, while a trace of Ni O impurity is observed via the metal acetate decomposition method. SEM results show the as-prepared carbonate particle has a spherical morphology with an average diameter of 10 lm, consisted of primary nano-sized particles with particle diameter of200 nm. The sample prepared by the carbonate co-precipitation method exhibits the highest discharge specific capacity and the best cycling stability, which results from the steady homogeneity of precursor constant by the fixation of CO2-3group. It can deliver an initial discharge specific capacity of 186.3 m Ahág-1, and retain 170 m Ahág-1after100 cycles at a current rate of 20 m Aág-1in the voltage range of 2.5–4.7 V at 25 °C. Moreover, even at the high temperature of 55 °C, it still delivers a reversible specific capacity of 222.6 m Ahág-1with little capacity loss after 30 cycles.

关 键 词：Sol–gel Carbonate co-precipitation LINI0.5MN0.5O2 

分 类 号：TM912[电气工程—电力电子与电力传动]