脱硫铁水罐渣线喷涂料的研究  

Study on Spray Coating for Slag Section of Hot Metal Desulphurization Tank

作　　者：欧阳德刚[1] 庄汉宁[1] 周明石[1] 刘成秋[1] 

机构地区：[1]武钢技术中心,湖北武汉430080

出　　处：《武钢技术》2003年第3期34-36,共3页Wisco Technology

摘　　要：通过脱硫铁水罐渣线结渣状况的现场调研 ,弄清了渣线喷涂料的性能要求 ,完成了原材料的选择分析 ,在实验室实验研究的基础上 ,进行了喷涂料的工业性试验与扩大性工业试验 ,取得了附着率大于 90 %、喷涂面平整。Through on-site investigation in slag build-up occurring currently over the slag section of the hot metal desulphurization tank,the requirements of properties for the spray coating and selection of its raw material are analyzed .On the basis of laboratory studies industrial scale and enlarged industrial experiments have been carried out and excellent results of over 90%adhesiveness ratio,smooth coating surface,less consumption of spray coating material and deceleration of slag build-up rate over the slag section have been achieved.

关 键 词：渣线 喷涂料 附着率 结渣速度 脱硫 铁水罐 

分 类 号：TF341.9[冶金工程—冶金机械及自动化] TQ175.733[化学工程—硅酸盐工业]