由一步成型的石膏坯体经水热反应生成多孔羟基磷灰石的试验研究  

Porous Hydroxyapatite Transformed from One-step Gypsum Moulding by Hydrothermal Reaction

作　　者：姜庆辉[1] 李木森[1] 宋云京[1] 亓永新[1] 宿庆财[1] 

机构地区：[1]山东大学材料科学与工程学院,山东济南250061

出　　处：《机械工程材料》2003年第9期15-17,35,共4页Materials For Mechanical Engineering

基　　金：山东省科技发展计划重点项目(011120106)

摘　　要：使用石膏作为原料,通过水热反应得到具有特殊结构的多孔羟基磷灰石。通过XRD分析,研究了石膏和水的配比、反应时间、pH值等对多孔羟基磷灰石合成的影响。通过SEM观察了多孔羟基磷灰石的分级多孔结构:第一级结构具有条状编织结构特点,孔径分布在10～100μm;第二级结构具有条状结构内的蜂窝状结构特点,其孔隙率和孔隙大小相对均匀,受反应条件的影响不大。Gypsum was used as raw material to prepare porous hydroxyapatite with hierachical structure by hydrothermal reaction. The effect of reaction time, ratio of gypsum to water and pH value on the preparation of porous hydroxyapatite was studied by XRD analysis. It is observed by SEM that the hierachical structure of porous hydroxyapatite has two levels. The first level is the basketwork, which has the pore diameters between 10～100μm and inherits the structure of gypsum. The second level is the honeycomblike network in the strip. This level has uniform porousness and diameters of the pores, which is seldom affected by conditions of the reaction.

关 键 词：羟基磷灰石 多孔材料 石膏 水热反应 

分 类 号：TQ174[化学工程—陶瓷工业]