检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:王娅茹[1] 田华峰[1] 卞其波 张帅[1] 项爱民[1] 王开[1]
机构地区:[1]北京工商大学材料与机械工程学院,北京100048
出 处:《中国塑料》2015年第4期64-69,共6页China Plastics
基 金:国家自然科学基金(51373004;51203004);北京市教委科研计划面上项目(KM201310011001);教师队伍建设-青年英才计划(YETP1453);科技成果转化-提升计划(PXM2013_014213_000097)
摘 要:以多异氰酸酯、芳香二酐和蓖麻油为原料,采用聚氨酯预聚体法制备聚氨酯酰亚胺(PUI)泡沫材料,分析了物理发泡剂1,1-二氯-1-一氟乙烷(HCFC-141b)对泡沫材料的化学结构、泡孔结构、开闭孔率、表观密度、体积膨胀率、力学性能和热性能的影响。结果表明,HCFC-141b的添加量并不改变PUI泡沫材料的化学结构和热性能;当HCFC-141b添加量从零增加到10%时,材料的平均泡孔直径、开闭孔率和体积膨胀率增加;而表观密度和压缩强度降低。Polyurethane-imide(PUI) foam was prepared from polyphenyl polymethylene polyisocyanates,pyromellitic dianhydride,and castor oil with prepolymer method using HCFC-141b.The effect of amount of HCFC-141b on the chemical structure,cell structure,open cell content,density,volume expansion rate,mechanical properties,and thermal behavior was analyzed.It showed that,HCFC-141b did not change the chemical structure and thermal behavior of the foam.With the increase of HCFC-141b from 0% to 10 %,average cellular diameter,open cell content,and volume expansion rate increased,while the density and compressive strength decreased.Thus the structure and properties of the PUI foam could be adjusted through changing the amount of HCFC-141b.
关 键 词:聚氨酯酰亚胺 泡沫 1 1-二氯-1-一氟乙烷 结构 性能
分 类 号:TQ328[化学工程—合成树脂塑料工业]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:18.219.24.193