橡胶相结构特征对ABS树脂力学性能的影响  

Influence of Structure of Rubber Particles on Mechanical Properties of ABS Resin

作　　者：刘振国[1] 吕为民[2] 于济宁[1] 杨静涛[3] 陈明[4] 

机构地区：[1]中国石油吉林石化公司研究院,吉林吉林132021 [2]中国石油吉林石化公司碳纤维厂,吉林吉林132021 [3]中国石油吉林石化公司动力厂,吉林吉林132021 [4]中国石油吉林石化公司合成树脂厂,吉林吉林132021

出　　处：《中国塑料》2015年第5期34-40,共7页China Plastics

摘　　要：采用乳液聚合法合成了具有橡胶结构特征的丙烯腈-丁二烯-苯乙烯共聚物(ABS),将其与苯乙烯-丙烯腈共聚物(SAN)共混,制备了ABS/SAN共混物,并系统地研究了橡胶相结构特征的影响因素及其对共混物力学性能及其形变机理的影响。结果表明,随着聚丁二烯(PB)橡胶粒子粒径的增大,共混物的冲击强度提高,拉伸强度降低;随着橡胶粒子粒径的增大,共混物形变机理从单一的银纹向橡胶粒子空洞化诱发基体剪切屈服转变。Several ABS copolymers were prepared via emulsion polymerization,which were meltblended with SAN resin forming ABS/SAN blends.The effect of rubber phase structure on the mechanical properties of the blends was studied.It was found that the impact strength increased and tensile strength decreased with increasing rubber particle size.Moreover,the deformation mechanism transformed from pure crazing to shear-yielding of matrix induced by cavitation of rubber particles.

关 键 词：丙烯腈-丁二烯-苯乙烯共聚物 苯乙烯-丙烯腈共聚物 橡胶 粒径 形变机理 力学性能 

分 类 号：TQ325.2[化学工程—合成树脂塑料工业]