絮凝气浮法处理环烷酸废水研究  

Studieson the treatment of wastewater containing naphthenic acid by flocculation-floation method

作　　者：于永辉[1] 杨旭[1] 朱静东[2] 李作臣[3] 肖羽堂[1] 蔡钊荣[1] 孙承林[1] 

机构地区：[1]中国科学院大连化学物理研究所,辽宁大连116023 [2]中国石油长庆油田公司,陕西西安710000 [3]中国石油辽河油田分公司沈阳采油厂,辽宁沈阳110000

出　　处：《工业水处理》2004年第1期27-29,共3页Industrial Water Treatment

摘　　要：对絮凝法处理环烷酸废水过程中有重要影响的因素进行了小试实验研究,得出了去除废水中CODCr的最佳絮凝条件:选用聚合硫酸铁(PFS)+阴离子聚丙烯酰胺(PHP)药剂,PFS投药质量浓度为275mg/L,PHP投药质量浓度为8mg/L;pH值对絮凝没有影响;温度对絮凝效果有影响,温度越低絮凝效果越好。以小试实验数据为依据,确定中试实验最佳投药量,PFS为275mg/L,PHP为6.7mg/L,在此条件下处理环烷酸废水,CODCr去除率达到83.1%。The treatment of wastewater containing naphthenic acid by flocculation method isstudied.The variabilitiesof important influencing factorshave been investigated in many tests.The optimum flocculating condition of removal COD Cr isdrawn asfollows:the dosage of polyferric sulfate is275mg/L,anionic polyacry - lamide8mg/L;pH value hasno effect on flocculation;but temperature hasaffect on the flocculation efficiency,and the lower the temperature is,the better the effect is.Based on the data received in laboratory tests,the optimum dosage of flocculantsisdetermined in pilot scale(2m 3 /h):polyferric sulfate(275mg/L),anionic polyacrylamide(6.7mg/L).The removal rate of COD Cr reaches83.1%,under the optimum condition.

关 键 词：絮凝气浮法 环烷酸废水 废水处理 聚合硫酸铁 阴离子聚丙烯酰胺 

分 类 号：X783.031[环境科学与工程—环境工程]