基于有功能量平衡原理的并联型有源滤波器的控制方法  

A Control Method of Shunt Active Power Filter Based on the Active Power Balance

作　　者：王冬平[1] 陈树君[1] 黄继强[1] 殷树言[1] 

机构地区：[1]北京工业大学机电学院,北京100022

出　　处：《电工技术学报》2004年第2期89-92,共4页Transactions of China Electrotechnical Society

基　　金：国家自然科学基金资助项目(50075003);北京市自然科学基金重点资助项目(3001001)。

摘　　要：介绍了一种基于有功能量平衡原理的并联型有源滤波器的控制方法。首先分析了并联型有源滤波器在补偿阻感负载时,瞬时有功和瞬时无功在系统中的传递过程。接着从有功能量平衡原理的角度,提出了通过对直流侧电压反馈进行PI调节,来获得整个系统所需的输入有功分量方法。这种方法无需复杂谐波检测,只需检测两路电源电流信号和一路电压信号,从而使整个控制系统得以简化。最后通过仿真和实验对提出的方法进行了验证,实验表明这种方法具有较好的谐波补偿效果。A simple control method of shunt active power filter, based on the active power balance theory. First the delivery processes of instantaneous active and passive powers is analyzed in a typical system. A shunt active power filter is used to compensate the harmonics generated by an inductor-resistor load. Then, from the point of view of the active power balance, the active current component needed by the whole system is obtained by PI regulating of DC voltage feedback. Finally simulations and experiments verify the method. Compared with conventional method, it does not need complicated harmonic detection and only needs two current sensors and one voltage sensor. Therefore the whole control system is quite simple and the good performance of harmonics compensation is verified by experiments.

关 键 词：有源滤波 能量平衡 谐波补偿 

分 类 号：TM46[电气工程—电器]