预紧扁挤压筒内孔变形分析和修模新技术  

Analysis of Inner-hole Deformation for Shrink-fitting Flat Container and a New Technology of Die-repairing

作　　者：王匀[1] 刘全坤[1] 

机构地区：[1]合肥工业大学材料科学与工程学院

出　　处：《农业机械学报》2004年第2期113-116,共4页Transactions of the Chinese Society for Agricultural Machinery

基　　金：国家自然科学基金资助项目 (项目编号 :5 0 0 75 0 2 2 )

摘　　要：提出了“CAE-数据处理 -变形曲线拟合 - CAM-检验精度”的修模流程 ;针对其中的关键技术 ,应用 ANSYS有限元分析软件 ,建立了 3层套预紧扁挤压筒的有限元模型 ,并对其进行了数值模拟 ;研究了内腔位移分布情况和内孔变形规律 ,并分段对内孔位移做了多项式曲线拟合 ;对缝隙度 Km 对内孔长短轴变形的影响作了分析 ,拟合出一定条件下内孔位移与 Km 的多项式插值函数关系式 ,得出 Km 的取值范围。为扁挤压筒修模、装配和结构优化、提高精度和效率提供了依据。CAE-data processing-deformation curve fitting-CAM-accuracy testing', a new process for die repairing is presented. To solve the key problems of the new process, the finite element model constructing and numerical simulation of a three-layer prestressed flat container were made based on ANSYS finite element software. The deformation rule and displacement of inner-hole were also presented, and polynomial fitting was applied to the displacement of inner cavity in a sectional way. The influence of gap ratio (K m) on major and minor axes, and the polynomial interpolating functions of inner-hole displacement and K m were obtained respectively. Moreover, the range of K m was got.

关 键 词：预紧扁挤压筒 内孔变形 修模技术 挤压成形 数值模拟 有限元模型 内腔位移 修模流程 

分 类 号：TG375[金属学及工艺—金属压力加工]