复合材料空心飞轮多环套装整体变形及应力简化精细分析  

SIMPLIFIED AND FINE ANALYSES OF THE FULL DEFORMATION AND STRESS OF PRESSFIT OF THE HOLLOW MULTI-RING COMPOSITE FLYWHEEL

作　　者：秦勇[1] 夏源明[2] 毛天祥[3] 

机构地区：[1]中国科学技术大学力学与机械工程系,合肥230027 [2]中国科学院中国科学技术大学材料力学行为和设计重点实验室,合肥230027 [3]中国科学院力学研究所,北京100080

出　　处：《复合材料学报》2003年第5期95-99,共5页Acta Materiae Compositae Sinica

基　　金：国家自然科学基金资助项目(10172085)

摘　　要：　采用多环过盈装配是解决复合材料飞轮径向强度过低的有效途径之一。本文作者采用平面应力简化模型,提出了计及过盈配合后变形导致实际过盈量增大计算飞轮套装后的初终应力分布的方法;提出了基于叠加原理计算多环过盈装配旋转飞轮应力的方法;提出了保证飞轮旋转时配合界面不脱离的相关临界转速的概念和计算方法。算例分析表明:过盈配合后的变形对初终应力的影响不能忽略;过盈量和套装环数与飞轮的初终应力和相关临界转速有密切的关系。Multiring pressfit is one effective way of solving the problem that the radial strength of composite flywheel is too low. A simplified model about the plane stress is adopted in this paper. Considering the increase of actual misfit in the pressfit, a method of calculating the stress of the multiring flywheel subjected to misfit is proposed. Based on the theory of stack, an approach of calculating the stress of the multiring flywheel subjected to centrifugal load is advanced. To ensure the flywheel against from separation, the concept and calculation of an interrelated critical rotating speed are introduced. The results showed that the effect of deformation in the pressfit on the stress of a flywheel subjected to misfit could not be neglected, the misfit and ring number having close relation with the stress and interrelated critical rotating speed of the flywheel.

关 键 词：复合材料飞轮 过盈量 径向强度 相关临界转速 

分 类 号：TK512[动力工程及工程热物理—热能工程] TB330.1[一般工业技术—材料科学与工程]