Mg、Cu合金急冷箔微型储能电阻焊连接特性对比分析  

Connection characteristics comparison of rapid quenched Mg and Cu alloy foils by micro-type energy-storage spot welding

作　　者：徐锦锋[1,2] 翟秋亚[1] 梁秀梅[1] 蒋永[1] 韩利强 

机构地区：[1]西安理工大学材料学院 [2]西北工业大学应用物理系,西安710072

出　　处：《焊接学报》2004年第2期77-79,83,共4页Transactions of The China Welding Institution

摘　　要：应用自制微型电容储能电阻焊机分别对AZ91D镁合金以及Cu-40%Co(质量分数)合金箔带进行了微型储能电阻点焊连接,获得了组织健全的连接接头。研究发现,AZ91D/AZ91D镁合金、Cu-Co/Cu-Co合金箔带的点焊接头均由熔核、熔核周围的热影响区、以及由熔核向热影响区过渡的半熔化区(熔合线)组成。镁合金接头具有规则的卵形熔核,而铜合金接头则出现扁平状的熔核。选用如下工艺参数,可获得组织致密的点焊接头。镁合金工艺参数为:焊接能量1.5～2.0J、焊接电压80V、电极压力10～20N;铜合金工艺参数为:焊接能量6.0～8.0J、焊接电压80V、电极压力4～8N。The connection characteristics of rapid quenched Cu-40wt%Co and AZ91D Mg alloy foils were studied using a self-developed micro-type energy-storage welding machine. The ideal connection joints have been obtained. The spot welded joints of both AZ91D Mg and Cu-40wt% Co alloy foils are composed of nugget, heat-affected zone. The joint morphology of Mg alloy foils is characterized by a regular ellipsoidal nugget, while those of Cu alloy foils exhibit the flat nugget. To obtain the high quality spot welded joint, the welding parameters are determined as following: Welding energy 1.5-2.0 J, welding voltage 80 V, and electrode pressure 10-20 N for AZ91D Mg alloy foils; and 6.0-8.0 J; 80-100 V; and 4-8 N for Cu-Co alloy foils respectively.

关 键 词：急冷箔 电容储能电阻焊 焊接接头 组织 镁合金 铜合金 

分 类 号：TG453.9[金属学及工艺—焊接] TG457.1