金川二矿区多中段机械化盘区回采顺序的数值模拟优化研究  

Optimization of Mining Sequences of Multi-level Mechanized Panels of Jinchuan's No 2 Mining Area through Numerical Method

作　　者：韩斌[1] 吴爱祥[1] 刘同有[2] 邹龙[2] 

机构地区：[1]中南大学资源与安全工程学院,湖南长沙410083 [2]金川集团公司,甘肃金昌737100

出　　处：《矿冶工程》2004年第2期4-7,共4页Mining and Metallurgical Engineering

基　　金：国家博士点专项基金资助项目 (2 0 0 2 0 5330 37)

摘　　要：根据金川二矿区多中段多盘区同时回采的实际情况 ,采用FLAC数值软件对 7种回采顺序进行了数值模拟 ,结果表明 ,从矿体一端向另一端渐进式下降的回采顺序 ,有助于改善二矿区回采区域的地应力条件 ,减小塑性区面积及围岩的移动。According to the actual situation of multi-level and multi-panel mining at the same time in No 2 mine area of Jinchuan company.The FLAC program is adopted to simulate seven kinds of mining sequences. It is concluded that progressive mining from one end panel to the other end panel along the strike helps to improve No 2 mining area's deep stress distribution, reduce the plastic zone, and control the vertical displacement of wall rock. Some suggestions are put forward for adjusting the mining sequence of No 2 mining area in the future.

关 键 词：采矿 多中段多盘区 回采顺序 数值模拟 机械化盘区 

分 类 号：TD853.391[矿业工程—金属矿开采]