晶闸管交流调压电路的触发方案研究  

Research on Trigger Methods for Thyristor AC-Voltage Regulator

作　　者：黄美成[1] 卢洁[1] 彭永进[1] 

机构地区：[1]湖南大学,湖南长沙410082

出　　处：《电力电子技术》2004年第2期54-55,共2页Power Electronics

摘　　要：比较分析了异步电机晶闸管交流调压软起动器中各种触发电路、电压同步和电流同步、双脉冲触发和宽脉冲触发等方案。仿真和实验证明,电压同步的宽脉冲触发方案最可靠,但需加大脉冲变压器的功率或使用脉冲列;电流同步的双脉冲触发方案次之,但存在稳定性问题,即如果受外界干扰后会产生完全失控的现象。Several trigger methods for thyristor AC-voltage regulator as asynchronous machine soft starter are compared and analyzed in this paper,including the synchronization trigger by line voltage or phase current,and double-pulses or wide-pulses etc.Simulative and experimental results shown that wide-pulses triggering circuit synchronized by line voltage is best one,which is more reliable than any other triggering methods,and the double-pulses triggering circuit synchronization by phase current is also a better one, but it exists a problem of unstable.

关 键 词：触发电路 仿真/晶闸管移相调压 

分 类 号：TM423[电气工程—电器] TN344[电子电信—物理电子学]