低损耗、高消光比的Z切钛扩散铌酸锂调制器(英文)  

A Z-cut Ti : LiNbO_3 Mach-Zehnder modulator with low loss and high extinction ratio

作　　者：张阜文[1] 陈福深[1] 邱昆[1] 薛飞[1] 

机构地区：[1]电子科技大学宽带光纤传输与通信系统技术重点实验室,四川成都610054

出　　处：《光电工程》2004年第4期24-27,共4页Opto-Electronic Engineering

基　　金：国家自然科学基金项目(60077030)

摘　　要：为了获得低损耗、高消光比的光波导电光调制器,以钛扩散铌酸锂( Ti: LiNbO3 )波导折射率的分布和光波导的优化设计为基础,利用有限差分光束传播法( FD-BPM )和点匹配法,从理论上给出了一种光损耗为-0.53dB、消光比为30dB的Z切钛扩散铌酸锂调制器。并且,在10Gbit/s的系统中对其进行了测试,取得了在120 km长的光纤上传输无误码的效果和较清晰的眼图。In order to obtain optical waveguide modulator with low loss and high extinction ratio, based on the refraction index distribution of a Ti:LiNbO3 waveguide and optimization design of the optical waveguide, a Z-cut Ti:LiNbO3 modulator with -0.53 dB optical loss and 30 dB extinction ratio is given theoretically by using finite-difference beam propagation method (FD-BPM) and point-matching method. A test has been carried out in a 10 Gbit/s system. A clear eye diagram without error code can be transmitted in an optical fiber 120 km long.

关 键 词：光电调制器 消光比 光损耗 

分 类 号：TN761[电子电信—电路与系统]