中厚板轧后管层流控冷瞬态温度场数值模拟  

Numerical Simulation of Transient Temperature Field of Steel Plate Cooled with Circular Laminar Jets after Rolling

作　　者：朱启建[1] 金永春[1] 孙凤花[2] 刘书强[2] 

机构地区：[1]首钢集团公司技术研究院 [2]山东科技大学教务处,山东泰安271019

出　　处：《材料热处理学报》2004年第2期72-75,共4页Transactions of Materials and Heat Treatment

摘　　要：利用热流耦合有限元方法得到了管层流水冷区钢板表面热流边界条件 ,适用于板面温度为10 0～ 90 0℃ ,上、下集管射流初始速度分别为 1 5～ 3 5m s、2 5～ 4 5m s。建立了钢板瞬态温度场求解的有限元几何模型、网格模型、材料属性与初始条件等 ,并对 12～ 6 0mm厚度钢板控冷过程进行了数值模拟与分析。计算终冷温度与实测结果比较 ,相对误差低于 5 % ,温降相对误差大部分低于 10 %。The heat flow boundary condition on steel plate cooling in laminar jets, which was applied to the plate surface at 100°C-900°C and the initial velocity of upper and lower header jets 1.5 m/s-3.5 m/s and 2.5 m/s-4.5 m/s separately, was calculated using flow-thermal coupling FEM (Finite Element Method). The FEM geometrical model, meshing model, material property and initial conditions were established for the solution of plate's transient temperature field. Numerical simulation and analysis were made for controlled cooling process of plate thickness of 12 mm-60 mm. Comparison of the calculated end-cooling temperature with the experimental result, showed that the relative error is less than 5%, and as for temperature dropping, the error is mostly less than 10%.

关 键 词：中厚板 层流冷却 温度场 控制冷却 数值模拟 

分 类 号：TG335[金属学及工艺—金属压力加工] TG162