金属切削加工的热力耦合模型及有限元模拟研究  

Coupled Thermo-mechanical Model for Metal Orthogonal Cutting Process and Finite Element Simulation

作　　者：黄志刚[1] 柯映林[1] 王立涛[1] 

机构地区：[1]浙江大学机械与能源工程学院,浙江杭州310027

出　　处：《航空学报》2004年第3期317-320,共4页Acta Aeronautica et Astronautica Sinica

基　　金：国家自然科学基金(50175102);国防型号工程(00 1810 0785)资助项目

摘　　要：基于切削加工的热-弹塑性有限元方程并在一定假设的条件下,建立了金属正交切削加工的热力耦合有限元模型。分析、研究了切屑分离标准、刀屑界面的摩擦模型以及热控制方程等切削加工模拟所涉及的关键技术,并提出了几何-应力切屑分离标准。最后,采用ABAQUS软件对材料40CrNiMoA进行了切削加工模拟,并分析、讨论了模拟结果。通过与试验数据比较,证明了所建立的有限元模型的正确性。Based on thermo-elastic-plastic finite element equation for simulating the metal orthogonal cutting process, a coupled thermomechanical model with regard to plain strain orthogonal metal cutting is constructed under some assumptions. Several special finite element techniques, such as the chip separation criteria and friction model, are implemented to improve the accuracy and efficiency of the finite element simulation. A chip separation criterion based on stress failure is adopted to realize the separation of twin nodes. The machining process of material AISI4340 is simulated, and some results of simulation are analyzed and discussed. This coupled thermomechanical model is proved by comparing the simulation results with the experimental data.

关 键 词：切削加工 热力耦合 切屑分离标准 有限元模拟 

分 类 号：TH123.2[机械工程—机械设计及理论]