宽频高吸收双层吸波材料仿真设计及试验验证  

Simulation and Experimentation of Wide Frequency Electromagnetic Shielding Coating

作　　者：王喆[1] 王月祥[1,2] 张存瑞 李静 张小刚 米玉洁[1] 

机构地区：[1]中国电子科技集团公司第三十三研究所,山西 太原 [2]中国–白俄罗斯电磁环境效应“一带一路”联合实验室,山西 太原

出　　处：《应用物理》2022年第9期503-511,共9页Applied Physics

摘　　要：采用CST Microwave Studio电磁仿真软件对干涉型吸波材料、损耗型吸波材料及干涉/损耗型双层吸波材料的反射率进行仿真设计。仿真结果表明,干涉型吸波材料最大吸收频率点即干涉频率随着材料厚度的增加向低频移动,最大吸收率由材料的厚度决定;损耗型吸波材料最大吸收频率点随着材料厚度的增加向低频移动,最大吸收率由材料的电磁参数决定;干涉/损耗型双层吸波材料可有效地结合两种吸波材料的优势,实现拓宽吸收频段,增大最佳反射率。制备干涉/损耗型双层橡胶基平板吸波材料,并进行测试,结果表明:该材料不仅有效地拓宽了平板材料的吸收带宽(−10 dB),有效带宽为9 GHz,而且干涉频率附近实现了较强吸收峰(−47.8 dB),是一种“宽频、高效”的吸波材料设计方法。The CST Microwave Studio electromagnetic simulation software was used to simulate and design the reflectivity of interference type absorbing materials, lossy absorbing materials and interference/lossy double-layer absorbing materials. The simulation results show the maximum absorption frequency point of the interference type wave absorbing material, that is, the interference frequency moves to the low frequency with the increase of the material thickness, and the maximum absorption rate is determined by the material thickness;the maximum absorption frequency point of lossy absorbing material moves to low frequency with the increase of material thickness, and the maximum absorption rate is determined by the electromagnetic parameters of the material. The interference/lossy double-layer absorbing material can effectively combine the advantages of the two absorbing materials to broaden the absorption frequency band and increase the optimal reflectivity. The interference/loss type double-layer rubber-based flat plate absorbing material was prepared and tested. The results showed that it not only effectively broadened the absorption bandwidth (−10 dB) of the flat plate material, the effective bandwidth was 9 GHz, but also achieved strong absorption near the interference frequency of peak (−47.8 dB), which is a “broadband, high-efficiency” design method for absorbing materials.

关 键 词：干涉 损耗 吸波 双层介质 

分 类 号：TB34[一般工业技术—材料科学与工程]