基于有限元仿真的PIB-ST石英SAW传感器对氯化物的灵敏度研究  

Study on Sensitivity of PIB-ST Quartz SAW Sensor to Chloride Based on Finite Element Simulation

作　　者：龚建伟 谢骅 

机构地区：[1]苏州科技大学,江苏 苏州 [2]黑龙江工程学院汽车与交通工程学院,黑龙江 哈尔滨

出　　处：《传感器技术与应用》2021年第3期153-172,共20页Journal of Sensor Technology and Application

摘　　要：如今,有机气体可以说是无处不在。许多有机气体对人体和环境均有非常大的害处,因此研究一种新型有机气体传感器显得相当有必要。首先针对声表面波有机气体传感器的研究意义和历史发展进行分析,然后选择COMSOL软件构建了一种声表面波有机气体传感器的二维模型,以进行有限元仿真。模型主要由ST-切型石英基底、PIB敏感薄膜和铝电极构成。在模型构建完成之后,选择了六种有机气体对声表面波有机气体传感器模型进行了仿真。仿真过程中所改变的主要性能参数分别是铝电极的厚度、气体的具体参数、声表面波有机气体传感器的敏感薄膜厚度和有机气体的浓度。对铝电极和敏感膜厚度的仿真可以达到优化传感器机电耦合系数的目的。通过仿真,发现声表面波敏感膜的厚度是重要的性能参数,而有机气体的参数也将影响仿真的结果。同时,实验表明声表面波有机气体传感器的灵敏度和精准度相当高,具有很高的实用价值。Nowadays,organic gases are everywhere. But a lot of organic gases are harmful to humanbody and environment, so it is necessary to study a new type of organic gassensor. The research significance and historical development of saw organic gassensor are analyzed, and then a two-dimensional model of saw organic gassensor is constructed with COMSOL software for finite element simulation. Themodel is mainly composed of ST quartz substrate, PIB sensitive film andaluminum electrode. After the model construction, six kinds of organic gasesare selected to test the model of saw organic gas sensor. The main performanceparameters changed during the test are the thickness of aluminum electrode, thespecific parameters of gas, the thickness of sensitive film of saw organic gassensor and the concentration of organic gas. The measurement of the thicknessof aluminum electrode and sensitive film can optimize the electromechanicalcoupling coefficient of the sensor. Through the test, it is found that thethickness of saw sensitive film is an important performance parameter, and theparameters of organic gas will also affect the test results. At the same time,the experiment shows that the sensitivity and accuracy of saw organic gassensor are quite high, which have high practical value.

关 键 词：声表面波 氯化物 传感器 灵敏度 

分 类 号：TP2[自动化与计算机技术—检测技术与自动化装置]