检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:邝传基
机构地区:[1]上海理工大学机械工程学院,上海
出 处:《建模与仿真》2023年第1期451-460,共10页Modeling and Simulation
摘 要:构建适用于等几何分析的体参数化模型过程中,存在操作繁琐、耗时长等突出问题,针对这些问题,本文提出一种基于平面四边剖分的体参数化模型快速构建的方法。首先,从草图中提取模型轮廓参数,利用提取到的参数构建曲线轮廓;其次,使用连接线自动添加算法,创建内外轮廓连接线,将存在亏格的模型转换为零亏格;然后,结合四边剖分算法对多边形轮廓进行剖分;最后,通过几何操作,将二维曲面映射到三维得到体参数化模型。实例表明该方法能够通过较少的模型参数快速得到全六面体参数化模型,明显提高了体参数化模型构建效率。In the process of building a volume parametric model suitable for isogeometric analysis, there are some prominent problems, such as tedious operation and long time. In order to solve these prob-lems, this paper proposes a rapid construction method of volume parametric model based on plane quadrilateral division. Firstly, the model contour parameters were extracted from the sketch, and the curves were constructed with the extracted parameters. Secondly, the connection line automat-ic addition algorithm is used to create the internal and external contour connection lines, and the model with defect is converted to zero defect. Then, the polygon contour is divided by the four-sided algorithm. Finally, through geometric operation, the two-dimensional surface is mapped to the three-dimensional body parameterized model. An example shows that this method can quickly ob-tain the full hexahedral parametric model with fewer model parameters and significantly improve the efficiency of volumetric parametric model construction.
关 键 词:参数化模型 曲线轮廓 模型转换 几何操作 剖分算法 连接线 快速构建 提取模型
分 类 号:TP3[自动化与计算机技术—计算机科学与技术]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.249