检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
机构地区:[1]中国地质调查局廊坊自然资源综合调查中心,河北 廊坊
出 处:《自然科学》2022年第6期960-968,共9页Open Journal of Nature Science
摘 要:以串草圪旦煤矿6105工作面为研究对象,利用UAV (无人机)航测技术,对准格尔旗产生的裂缝发育规律进行了研究。1) 浅部煤层井下开采致使地表破坏,且多以地表裂隙形态为表现形式。2) 沿单个工作面方向,裂缝间距呈平行弧状,间隔距离为5~20 m,裂缝在地表破坏严重区形成下错,错台高度约为15~130 cm。拉张破坏严重区域内形成裂缝槽,槽宽约2~10 m。该组裂隙呈“C”型,裂缝两侧与工作面推进方向呈3˚~5˚的夹角。3) 沿单个工作面倾角平行的沟槽中形成线性裂缝,该组裂缝较长,在顺槽至外围一定范围内发育。4) 以最外围首次出现地裂缝为边界,对裂缝影响角反演,测得影响角59.5˚~61.6˚、48.6˚。研究结果有助于对准格尔地区浅埋煤层地表裂隙的理论认识,为矿区地表塌陷预测与防治及生态修复提供了依据。Taking the 6105 working face of Chuancaogedan coal mine as the research object, the development law of cracks produced by Zhungeer Banner was studied by using UAV aerial survey technology. 1) Underground mining of shallow coal seam causes surface damage, which is mainly manifested in the form of surface cracks. 2) Along the direction of a single working face, the crack spacing is parallel arc shape, the interval distance is 5~20 m, and the fracture is formed in the serious surface damage area, and the height of the wrong platform is about 15~130 cm. Fracture grooves are formed in the area of serious tensile failure, and the width of the grooves is about 2~10 m. The fractures in this group are of “C” shape, and the Angle between the two sides of the fractures and the advancing direction of the working face is 3˚~5˚. 3) Linear fractures are formed in the grooves parallel to the dip Angle of a single working face. This group of fractures is long and develops in a certain range from the grooves to the periphery. 4) Taking the outermost ground fracture as the boundary, the influence Angle of the fracture is inverted, and the influence Angle is 59.5˚~61.6˚ and 48.6˚. The research results are helpful to the theoretical understanding of surface fissures of shallow coal seam in Zhungeer area, and provide the basis for the prediction, prevention and ecological restoration of surface collapse in mining area.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.175