500 kV智能变电站网络构架及信号源配置方案研究  

Investigation of Network Structure and Signal Source Allocation Scheme for 500 kV Smart Substation

作　　者：谭建成[1] 李妍[1] 李海生[1,2] 刘彬 

机构地区：[1]广西大学电气工程学院,南宁广西 [2]南方电网柳州超高压局,柳州广西

出　　处：《输配电工程与技术》2015年第1期11-19,共9页Transmission and Distribution Engineering and Technology

摘　　要：借鉴桂林500 kV变电站智能间隔挂网运行经验,考虑500 kV电压等级的可靠性要求及全站智能化时信息流量,提出一个适用于500 kV保护控及SCADA预警信息传输的智能变电站网络构架及信号源配置方案,具有以下特点:1) 电流电压互感器及SIUS的配置考虑信号的冗余需求。2) 过程总线采用代理服务器点对点直连方案,智能接口单元和间隔层保护控制设备光缆网络直联,简单直观。3) 站控层的通讯构架采用并行冗余/快速生成树冗余(PRP/RSTP)的网络方案。该方案具有双重冗余配置,能满足超高压/特高压系统保护测控系统的可靠性和实时性要求,因而特别适用于500 kV电压等级及以上的变电站。Studying the lessons and experience gained from 500 kV Smart Guilin Substation, considering the reliability requirements of protection and control systems at 500 kV voltage level, a smart substa-tion LAN architecture is proposed in the paper, along with a data source allocation plan. The pro-posed solution is of the following features: 1) Redundant signals sources design from Smart Inter-face Units (SIUs) that installed close to conventional or electronic instrument transformers;2) Proxy server &point-to-point process buses connecting SIUs to protection &control devices;3) A PRP/RSTP enabled substation LAN transporting SCADA alarms, time synchronization signals and remote access data over a single substation LAN. Full scope redundancy for protection &control applications is achieved via optimal allocation of measurement data sources. The proposed archi-tecture and data source allocation plan is able to meet the time stringent mission critical protection schemes requirement at 500 kV voltage level.

关 键 词：智能变电站 过程总线 变电站总线 采样值 GOOSE 双重冗余 

分 类 号：TM7[电气工程—电力系统及自动化]