电镀含磷废液处理技术探讨  

Discussion on Treatment Technology of Electroplating Waste Liquid Containing Phosphorus

作　　者：王强 朱海杰 郭鹏飞 王振宇 

机构地区：[1]安徽浩悦生态科技有限责任公司,安徽 合肥

出　　处：《水污染及处理》2024年第3期43-49,共7页Water Pollution and Treatment

摘　　要：本文针对电镀行业所产生的含次磷酸盐废水磷含量高、去除困难、处理效果不稳定等问题,提出了臭氧–双氧水–硫酸亚铁工艺,对次磷酸盐的氧化和总磷去除进行研究。首先添加臭氧和双氧水,利用双氧水和臭氧反应生成羟基自由基,对次磷酸盐进行氧化。待充分反应后再加入硫酸亚铁,硫酸亚铁一方面促进臭氧生成羟基自由基,另一方面和双氧水形成芬顿反应体系,进而将次磷酸盐氧化成正磷酸盐,最后加入氢氧化钙生成磷酸钙沉淀,达到有效去除次磷酸盐的目的。In view of the problems of high phosphorus content, difficult removal and unstable treatment effect in wastewater containing hypophosphate produced by electroplating industry, ozone-hydrogen peroxide ferrous sulfate process was proposed to study the oxidation of hypophosphate and total phosphorus removal. First, ozone and hydrogen peroxide are added, and hydroxyl radical is formed by the reaction of hydrogen peroxide and ozone to oxidize hypophosphate. After the full reaction, ferrous sulfate is added. On the one hand, ferrous sulfate promotes the formation of hydroxyl radical by ozone, on the other hand, it forms a Fenton reaction system with hydrogen peroxide, and then oxidizes hypophosphate into orthophosphate, and finally adds calcium hydroxide to generate calcium phosphate precipitation to achieve the purpose of effectively removing hypophosphate.

关 键 词：正磷酸盐 次磷酸盐 氧化 羟基自由基 

分 类 号：X70[环境科学与工程—环境工程]